Stripping is not the only way you can restore wood-piece to its former luster especially if you reside in Austin city, TX. There are other ways of preserving patina and the way the original finish looks like making sure the furniture does not lose its antique beauty. If your furniture breaks down or loses its luster you do not have to throw it away. Here is an easy way in which furniture restoration Austin can be possible.
Before embarking on repairs and touch-ups, the furniture is wiped by use of mineral spirits. This mineral spirits function to saturate the finish temporarily revealing the furniture outlook with nothing but a wipe-on coat on clear finish. The first step is to meticulously clean any furniture to be repaired. This allows restoration of the furniture original luster. The recommendation is the use of a mixture of ivory liquid dish soap. The proportions are the same as those used in dish washing. The procedure involves dipping a sponge into the mixture, squeezing it out then using it to scrub gently onto the surface. A paintbrush is the best to use in cleaning moldings and carvings. After scrubbing, the surface is rinsed using a wrung-out sponge and clean water. The wood-piece is dried using a clean towel.
After cleaning, the surface is rinsed with clean water and dried. Petroleum jelly and special removers are recommended in the removal of white rings. Firstly smear the ring using petroleum jelly and leave it to stay overnight. It works to get rid of the ring or make it less noticeable.
Delicate paint removers are used to scrap the paint taking care not to damage the finish. This can be made from razor and masking tape pieces whereby the tapes are wrapped round the blades and bend to curve. The damage is then filled with epoxy after thoroughly mixing epoxy putty. Its placed inside area that needs repair. If you find out that there are any absent veneer or chipped wood or even damaged molding, fix using the putty too.
After the epoxy has hardened; this could take several hours, you can now sand and tinge the repair. The repair is blended onto the surrounding surface through gel stain painting which matches color and design. Select two stain colors matching bright and obscure wood areas. A dab of both is put on a wood scrap creating various color ranges by unifying the two.
Spread gel stain onto the surface and wipe excess. The gel stain does not remove darkened water marks or remove the unwanted defects. All it does is hiding fine scratches and colors in regions that the finish has worn out.
Small cracks or nail holes are filled with fill sticks of wax that are colored. Repair sticks made of wax or fills of pencil can also be used. Small dents can be done away with through wetting. The moisture from the wetting makes the crumbled wood to swell back to its former shape.
The ultimate step in this process is wiping on a finishing coat. This is done to restore sheen and also for protection of the surface. Any wipe done on the finish works.
Before embarking on repairs and touch-ups, the furniture is wiped by use of mineral spirits. This mineral spirits function to saturate the finish temporarily revealing the furniture outlook with nothing but a wipe-on coat on clear finish. The first step is to meticulously clean any furniture to be repaired. This allows restoration of the furniture original luster. The recommendation is the use of a mixture of ivory liquid dish soap. The proportions are the same as those used in dish washing. The procedure involves dipping a sponge into the mixture, squeezing it out then using it to scrub gently onto the surface. A paintbrush is the best to use in cleaning moldings and carvings. After scrubbing, the surface is rinsed using a wrung-out sponge and clean water. The wood-piece is dried using a clean towel.
After cleaning, the surface is rinsed with clean water and dried. Petroleum jelly and special removers are recommended in the removal of white rings. Firstly smear the ring using petroleum jelly and leave it to stay overnight. It works to get rid of the ring or make it less noticeable.
Delicate paint removers are used to scrap the paint taking care not to damage the finish. This can be made from razor and masking tape pieces whereby the tapes are wrapped round the blades and bend to curve. The damage is then filled with epoxy after thoroughly mixing epoxy putty. Its placed inside area that needs repair. If you find out that there are any absent veneer or chipped wood or even damaged molding, fix using the putty too.
After the epoxy has hardened; this could take several hours, you can now sand and tinge the repair. The repair is blended onto the surrounding surface through gel stain painting which matches color and design. Select two stain colors matching bright and obscure wood areas. A dab of both is put on a wood scrap creating various color ranges by unifying the two.
Spread gel stain onto the surface and wipe excess. The gel stain does not remove darkened water marks or remove the unwanted defects. All it does is hiding fine scratches and colors in regions that the finish has worn out.
Small cracks or nail holes are filled with fill sticks of wax that are colored. Repair sticks made of wax or fills of pencil can also be used. Small dents can be done away with through wetting. The moisture from the wetting makes the crumbled wood to swell back to its former shape.
The ultimate step in this process is wiping on a finishing coat. This is done to restore sheen and also for protection of the surface. Any wipe done on the finish works.